3 wiring according to emc, 1 power connections on the terminal board, Wiring according to emc – Lenze MDxMA-MHxMA-MFxMA-MDERA-MHERA Three-phase AC motors User Manual
Page 34: Power connections on the terminal board, Electrical installation
![background image](/manuals/565694/34/background.png)
Electrical installation
Wiring according to EMC
l
34
BA 33.0005−EN 2.0
Possible countermeasures
Appropriate countermeasures must be taken if exceedance of the permissible voltage
peaks cannot be ruled out:
ƒ
Reduce the DC−bus voltage (brake chopper threshold voltage);
ƒ
Use filters, chokes;
ƒ
Use of special motor cables.
6.3
Wiring according to EMC
The EMC−compliant wiring of the motors is described in detail in the Operating
Instructions for the Lenze controllers.
ƒ
Use of metal EMC cable glands with shield connection.
ƒ
Connect the shielding to the motor and to the device.
6.3.1
Power connections on the terminal board
Motor
Power connections on the terminal board
Single−rotation motors
Pole−changing motors
U
D
1
0
MT_MXXXX_001.iso/dm
s
Dual−voltage motors
Legend
U
UU
L1/L2/L3
Power connection
TB1/TB2
Thermal contact − TCO
0
Low speed
1
High speed
UU
Low voltage
U
High voltage
+
PE connection (optional)