6 assembly of the cover seal, 5 repair, Assembly of the cover seal – Lenze MDxMA-MHxMA-MFxMA-MDERA-MHERA Three-phase AC motors User Manual
Page 55: Repair, Disposal, Maintenance/repair
Advertising
Maintenance/repair
Repair
Assembly of the cover seal
l
55
BA 33.0005−EN 2.0
8.4.6
Assembly of the cover seal
15
13
12
10
7
1
7
1
15
6
13 12
13
10
KL458−010−a
KL458−007−a
Fig. 8
Assembly of the cover seal
1
Armature plate
10
Allen screw
15
Endshield
6
Flange
12
Friction plate
7
Stator
13
Cover seal
1. Insert the cable through the cover ring.
2. Push the cover ring over the stator.
3. Press the lips of the cover ring into the groove of rotor and flange.
– If a friction plate is used, the lip must be pulled over the flanged edge.
8.5
Repair
ƒ
It is recommended to have all repairs performed by Lenze Service.
ƒ
Delivery of spare parts is available upon request.
Advertising