Lenze E94AMHE - Manual (Page 61)

Mounting and wiring the installation backplane 5
l
61 EDK94AMH24 DE/EN/FR/ES/IT 3.1
5 Mounting and wiring the installation backplane
)
Note!
The devices must be installed in housings (e.g. control cabinets) to meet
applicable regulations.
)
Note!
Axis modules E94AMxE0324 and installation backplane E94AZPM0324 can
only be connected directly to each other! A use with another device or
installation backplane of size 3 is not permissible and is prevented through a
plug protection.
Please consider this when planning drive systems where the devices are
mounted side by side.
Mounting and wiring of the installation backplane is described in the Mounting Instructions for the
installation backplane.