4 mechanische installation, 1 storage, 2 mounting – Lenze GPA servo planetary geared motors User Manual
Page 13: 1 preparation, Mechanische installation, Preparation
![background image](/manuals/565839/13/background.png)
Mechanical installation
Storage
4
13
BA 12.0030 EN 2.0
4
Mechanische Installation
Danger!
Only transport the drive with transport equipment or hoists which are suitable
for this load (see transport weights, chapter 3.2). Ensure a safe fixing. Avoid
shocks!
The motors attached to the gearbox are partially equipped with eyebolts.
These are
exclusively
determined for motor/gearbox mounting and
dismounting and must
not
be used for the complete geared motor!
4.1
Storage
If you do not install the gearbox immediately, ensure appropriate conditions of storage.
ƒ Up to one year:
– Without special measures in dry and dust-free rooms and protected from sunlight.
ƒ Over a year:
– Requires consultation with the plant.
4.2
Mounting
4.2.1
Preparation
Stop!
Thoroughly remove anticorrosion agents from output shafts and flange faces.
Show/Hide Bookmarks