2 safety, 1 personnel responsible for safety, 2 general safety information – Lenze GPA servo planetary geared motors User Manual

Page 8: Safety, 2safety

Advertising
background image

Safety

Personnel responsible for safety

2



8

BA 12.0030 EN 2.0

2

Safety

2.1

Personnel responsible for safety

Operator
ƒ An operator is any natural or legal person who uses the drive system or on behalf of

whom the drive system is used.

ƒ The operator or his safety officer must ensure

– that all relevant regulations, instructions and legislation are observed.
– that only qualified personnel work with and on the drive system.
– that the personnel have the Operating Instructions available for all corresponding

operations.

– that non-qualified personnel are prohibited from working with and on the drive

system.

Skilled personnel
Skilled personnel are persons who - because of their education, experience, instructions,

and knowledge about corresponding standards and regulations, rules for the prevention

of accidents, and operating conditions - are authorised by the person responsible for the

safety of the plant to perform the required actions and who are able to recognise potential

hazards.

(See IEC 364, definition of skilled personnel)

2.2

General safety information

ƒ This safety information is not claimed to be complete. In case of questions and

problems, please contact your Lenze representative.

ƒ At the time of delivery the drive system meets the state of the art and ensures

basically safe operation.

ƒ The drive system is a source of danger for persons, for the drive system itself, and for

other material assets of the operator, if
– unqualified personnel works with and on the drive system,
– the drive system is used inappropriately.

ƒ The drive systems must be designed such that they perform their functions after

proper installation and with application as directed in fault-free operation and that

they do not cause hazards for persons. This also applies for their interaction with the

complete plant.

ƒ Make sure by appropriate measures that in case of failure of the drive system no

material damage is caused.

ƒ Operate the drive system only when it is in a proper state.
ƒ Retrofittings, modifications, or redesigns of the drive system are basically

prohibited. Lenze must be contacted in all cases.

Show/Hide Bookmarks

Advertising