Configuring the host system – Lenze E82ZAFPC010 User Manual
Page 67
Advertising
Commissioning
Configuring the host system
7
EDK82ZAFPC-010 DE/EN/FR 6.0
67
H2 LeitsystemKonfigurieren-leitsystem_konfig_profibus
Configuring the host system
The host must be configured before communication with the communication module is
possible.
Master settings
For configuring the PROFIBUS, the device data base file (GSE file) of the communication
module has to be imported into the configuring software of the master.
Tip!
The GSE file can be downloaded in the ”Services & Downloads” area at
www.Lenze.com.
Advertising