Lenze E94P v4.0 - Manual (Page 17)

13433283_P94MI01D_EN 15
Installation
3.4 Electrical Installation
These are quick connect instructions only. Consult PositionServo User Manual S94H201 for full connection details.
Step Action Description
1 Connect the Drive’s Ethernet port P2 to
your PC’s Ethernet port.
Ethernet Port
Drive PC/Laptop
P2
P3
P4 P6
P5
CAT 5e cable
2 Apply power to the drive and wait until
“
diS ” shows on the display.
8 d iS
3 Confirm that the PC and the drive have
the correct IP setting. (S94H201, section
6.2.2).
4 Launch MotionView software on your
computer via a web browser.
5 From the main toolbar select [Connect]
6 In the Connect dialog box, click [Discover]
to ping the network for any drives. If a
drive is located the address will appear
in the dialog box. If no address appears
then you can type the IP address in.
The default address for the drive is
192.168.124.120. Click [Connect] to
connect to the drive
7 Once connected, the drive name and
identifier are displayed in the upper left-
hand corner of the Parameter Window.