Lenze E94P v4.0 - Manual (Page 2)

About These Instructions
Copyright © 2013 - 2011 by Lenze AC Tech Corporation.
All rights reserved. No part of this manual may be reproduced or transmitted in any form without written permission
from Lenze AC Tech Corporation. The information and technical data in this manual are subject to change without
notice. Lenze AC Tech makes no warranty of any kind with respect to this material, including, but not limited to, the
implied warranties of its merchantability and fitness for a given purpose. Lenze AC Tech assumes no responsibility
for any errors that may appear in this manual and makes no commitment to update or to keep current the information
in this manual.
These mounting instructions pertain to the PositionServo drive with Hardware Version 2. Read both this document
and the PositionServo User Manual (S94H201) in their entirety before operating or servicing a PositionServo drive.
Observe all safety instructions.
Drive Identification Label
C A B D E F
Type:
E94P120Y2NES
ID-No: 13014745
INPUT: 1(3)/PE
120/240 V
24.0 (13.9) A
50-60 HZ
OUTPUT: 3/PE
0 - 230 V
12.0 A
For detailed information
refer to instruction
Manual: S94H201
SN: 13014745012345678
E94P120Y2NES0XX2# ##
Made in USA
Model 940
13014745012345678
A B C D E F
Certifications Model Number Input Ratings Output Ratings Hardware Version Software Version
Package Contents
Scope of Supply Important
1 Model PositionServo:
Type E94P or E94R
1 Mounting Instructions (English)
1 MotionView CD ROM including:
- configuration software
- documentation
After reception of the delivery, immediately check whether the scope of supply matches the
accompanying papers. Lenze-AC Tech does not accept any liability for deficiencies claimed
subsequently.
Claim:
- visible transport damage immediately to the forwarder
- visible deficiencies/incompleteness immediately to your Lenze representative.
Related Documents
The documentation listed herein contains information relevant to the operation of the PositionServo and MotionView
OnBoard. To obtain the latest documentation, visit the Download/Technical Documentaion section of http://www.
lenze.com.
Table 1: Reference Documentation
Document # Description
S94H201 PositionServo (with MVOB) HW V2 User Manual
PM94H201 PositionServo (with MVOB) Programming Manual
P94MOD01 Position Servo ModBus RTU over RS485 ; Modbus TCP/IP
P94CAN01 PositionServo CANopen Communications Reference Guide
P94DVN01 PositionServo DeviceNet Communications Reference Guide
P94ETH01 PositionServo EtherNet/IP Communications Reference Guide
P94PFB01 PositionServo PROFIBUS Communications Reference Guide