Lenze SS208AC - Manual (Page 22)

SimpleServo 100/200 User Manual Rev 3.4
DIAGNOSTIC LED
There is a bi-color diagnostic LED mounted between TB1 and TB2 connectors. LED is designed to help
you monitor system status and troubleshoot any faults.
LED functions:
GREEN Blinking - Power ON, no fault, drive disabled
GREEN Solid - Power ON, no faults, drive enabled
RED Solid - General Fault
RED Blinking - Under voltage
ENABLING THE DRIVE
Regardless of selected operating mode, the SimpleServo must be enabled before it can operate.
Refer to drawing A1.3 in Appendix A for various enabling options.
22