Lonworks network variables – Lenze MCH Series Drives User Manual
Page 19
RG-MHLON
16
LonWorks Network Variables
NvoDrvCurnt
NOTE: This parameter is not supported in drives with software version MC11101 or MC11102.
Definition
Network output SNVT_amp nvoDrvCurnt
Explanation
This output network variable provides the drive output current in Amps.
Valid Range
0.0 to 3276.7 A
Default Value 0.0 A
NvoDrvRunHours
NOTE: This parameter is not supported in drives with software version MC11101 or MC11102.
Definition
Network output SNVT_time_hour nvoDrvRunHours
Explanation
This output network variable provides total operation time of the motor in hours.
Valid Range
0 to 65535 hours
Default Value 0 hours
NvoDrvVolt
NOTE: This parameter is not supported in drives with software version MC11101 or MC11102.
Definition
Network output SNVT_volt nvoDrvVolt
Explanation
This output network variable provides the drive output voltage in Volts.
Valid Range
0 – 700 V
Default Value 0 V
NvoSpeedActRpm
Definition
Network output SNVT_count_inc nvoSpeedActRpm
Explanation
This output network variable provides the speed of the drive in RPM’s
Valid Range
-32768 to 0 or 0 to 32767
Default Value 0 RPM