5 lonworks xif files, Lonworks xif files, Lonworks network variables – Lenze MCH Series Drives User Manual
Page 26
23
RG-MHLON
LonWorks Network Variables
nciParWrite
Definition
Network config input SNVT_count nciParWrite
Explanation
Chooses the parameter value to be written to the drive.
Valid Range
1 - 46
Default Value 0
4.5 LonWorks XIF Files
The LonMark external interface (or XIF) file is used to set up a LonWorks network with an MCH Series drive
that has not yet been commissioned. These files are available for download in the Technical Library of the
Lenze-AC Tech website.
Use Drive Parameter #63 to retrieve the software version of your MCH drive. Drives with software versions
MC11103 and later, and MC121xx use the 21312203.XIF file. If your MCH drive has an earlier software
version (MC11101 or MC11102), then contact technical support for the appropriate XIF file.
4.6 Reference and Links
MCH Series Variable Frequency Drives visit:
http://www.lenze-actech.com
LonWorks and Echelon Corporation visit:
http://www.echelon.com
LonMark Functional Profiles (including 6010) visit:
http://www.lonmark.org
ANYBUS-S Drive Profile Embedded Interface Cards, LonMark 6010 Functional Profile visit:
http://www.anybus.com/products/abs.shtml