Lenze MCH Series Drives - Manual (Page 21)

RG-MHLON 18
LonWorks Network Variables
NvoRunning
Definition Network output SNVT_switch nvoRunning
Explanation This output indicates whether or not the motor is running.
Valid Range:
State Value Command
0 0.0% The motor is not running
1 100.0% The motor is running
Default Value 0
NvoFaulted
Definition Network output SNVT_switch nvoFaulted
Explanation This output indicates whether or not the drive is currently faulted.
Valid Range:
State Value Command
0 0.0% The drive is not faulted
1 100.0% The drive is faulted
Default Value 0
NvoEmrgOvrd Stat
Definition Network output SNVT_hvac_emerg nvoEmrgOvrdStat
Explanation Feedback for the nviEmrgOvrd
Valid Range:
Value Function
EMERG_NORMAL Not emergency mode, motor control enabled
EMERG_SHUTDOWN Emergency shutdown mode. Motor stopped.
Default Value EMERG_NORMAL
NvoParValue
Definition Network output SNVT_count nvoParValue
Explanation This variable contains the data read at the parameter set by nciParRead.
Valid Range 1 - 46
Default Value 0