Lenze EPM−H502 - Manual (Page 70)

Commissioning
Project transfer to the operating unit
Project download
5
l
70 EDBPM−H502 DE/EN/FR 5.1
5.2.2 Project download
)
Note!
In the »HMI Designer« you can select whether you want to update
the firmware at the time the project is loaded.
The firmware must always be updated with the first download of a
project to the operating unit or after an update of the
»HMI Designer« planning tool.
I
Tip!
Sample projects for the operating unit can be found in the
»HMI Designer« planning tool under File
W Open... W Samples.