Lenze EPM-H515 - Manual (Page 70)

Commissioning
Status messages of the operating unit
5

70 EDBPM-H515 DE/EN/FR 2.0
5.3 Status messages of the operating unit
The operating unit status can be queried any time. Information can be obtained
about
ƒ the interface (port)
ƒ the name of the loaded driver
ƒ the version of the loaded driver (Ver)
ƒ mains address of the operating unit (Addr)
ƒ the last error
If you want to ... Touch the fields... Example
A ...query the status of the operating
unit
For this purpose, touch the display
in the corners
– top right  and bottom left  or
– top left  and bottom right .
The first corner to be touched must
not contain a selectable field.
0
1
2
3
B ... close the status display.
ESC
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE