Lenze EPM-H521 - Manual (Page 72)

Commissioning
Date/Time and contrast setting
5

72 EDBPM-H521 DE/EN/FR 2.0
5.4 Date/Time and contrast setting
If you want to ... Touch the fields ... Example
A ... set date/time and contrast on the
dislay.
1. Call up status messages. For this
purpose, touch the display in the
corners
– top right  and bottom left  or
– top left  and bottom right .
The first corner to be touched must not
contain a selectable field.
0
1
2
3
2. Select menu for time/date and
contrast.
PROG
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
Port : NET
Driver : CAN Lenze M
Ver : 1.12
Addr : NO ADDRESS
Error : RESET
PROG
ESC
TRAN
PAGE
B ... set date/time.
ESC
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
1. Touch field “SET CLOCK” to select
the menu.
ESC
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
ESC
SET CONTRAST : 04
SET CLOCK:
Wed,13/09/00
12:50:10
2. Select desired field.
or
ESC
12:50:10 13/09/00
3. Change value.
or
ESC
12:50:10 13/09/00 4. If required, repeat steps 2. and 3. to
change further values. ESC
12:50:10 13/09/00
5. Confirm the input.
– The menu for time/date and
contrast is displayed.
ESC
12:50:10 13/09/00