Lenze EPM-H521 - Manual (Page 80)

Operation
Calling up information messages
6

80 EDBPM-H521 DE/EN/FR 2.0
6.3 Calling up information messages
ƒ Information messages
– are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit).
–
can only be called up as long as the triggering event is active.
– must have been programmed in the ”HMI Designer” planning tool.
– can be up to 4 lines of 70 characters long each (single character size).
ƒ The second to last line contains a programmable message field. This field
indicates the numerical size of the variables activated by the message.
ƒ The last line shows the date and time when the message was initiated.
ƒ signals when an information message is present.
Symbols and characters in the information messages
Symbols/characters used in the line for
date/time
Meaning
The information message has been called up for the
first time
HELP Help is assigned to the information message. ( E 83)
If you want to ... Touch the fields... Example
A ... call up an information message.
ESC
Temperature exceeds
safety limit
1700
13-09-2000 10:55a HELP
125.5
13-09-2000 10:45a HELP
Pressure exceeds
safety limit
B ... select the next information
messages.
or
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
ESC
Water level below
working threshold
-10
13-09-2000 11:00a HELP
C ... close the information messages.
ESC