Lenze E94AxHE Technology Application Positioning sequence control - Manual (Page 26)

9400 Technology applications | Positioning sequence control
Short setup
Step 5: Transferring the application to the controller
26
L
EDS94TA10060xxxx EN 1.2 - 03/2010
4.8 Step 5: Transferring the application to the controller
1. Update devices.
– Set the checkmark in the control field Recreate all.
– Click Create to start the compiling process.
2. Go online and transfer the application to the controller.
– With an online connection, the »Engineer« displays the current controller parameter
settings with a yellow background colour.

Note!
The transferred application is always stored in the first application memory
location in the memory module of the controller.
The preinstalled technology applications on the following memory locations are
still available.