Lenze E94AxHE Technology Application Positioning sequence control - Manual (Page 41)

EDS94TA10060xxxx EN 1.2 - 03/2010
L
41
9400 Technology applications | Positioning sequence control
Parameter setting & configuration
Program flow
5.3.6 Sequencer outputs
Via a DWORD-to-BIT-converter, 32 sequencer outputs of type "BOOL" are available for
"switching" which can be set to FALSE or TRUE with the action type "switching".
 These sequencer outputs can be connected with the inputs of the application or device
interfaces via multiplexer parameters.
 The following table lists the corresponding module outputs of the FB interconnection
and the corresponding selection numbers for the multiplexer parameters:
Module output Signal type Selection no. Selection text
SequencerOutput.bBit0  551 Sequencer output 1
SequencerOutput.bBit1 552 Sequencer output 2
SequencerOutput.bBit2 553 Sequencer output 3
... ... ...
SequencerOutput.bBit31 582 Sequencer output 32