Mk-377 saw operation – MK Diamond MK-377 User Manual
Page 20
Advertising
20
MK-377 SAW OPERATION
ADJUSTMENT & OPERATION
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for
which it was designed.
CAUTION
(A)
Loosen the retaining thumbscrew
and place the Adjustable Cutting
Guide to the desired cut length
and tighten thumbscrew
(B)
Place the tile against the
Ruler/Stop and Cutting Guide
(C)
Turn the motor ON and verify proper
cooling flow on both sides of the
blade (See Maintenance Section to
increase/decrease flow)
(D)
Perform the cut. Turn the motor
OFF when work is complete
Advertising