MK Diamond TX-3 - Manual (Page 19)

19
TX-3 INSPECTION & START-UP
5.
6.
7.
8. Press Grommet (Q) into the Main Cap (U).
Fill Water Tank up with clean water.
Screw Main Cap (U) onto Water Tank.
Ensure Filter sits on the bottom of the Tank at all times.
MISTING SYSTEM SETUP
T
C
Q
R
S
U
WARNING
ALWAYS disconnect unit from power supply when performing changes or adjustments.
STEP 1 - SETTING UP THE WATER TANK
1.
2.
3.
4. Install Grommet (Q) through one end of the Hose (R).
Feed the Hose through the Main Cap (U).
Insert Hose 1” minimum into Tube Adapter (S).
Insert Tube Adapter (S) into Filter (T).