MK Diamond MKDX Profile Milling Machine - Manual (Page 6)

6
MKDX SAFETY
Potential hazards associated with the MKDX Bullnose & Shaping Machine operation will be refer-
enced with Hazard Symbols which appear throughout this manual, and will be referenced in conjunc-
tion with Safety Message/Alert Symbols.
NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair
and clothing away from all moving parts to prevent injury.
ALWAYS place the power ON/OFF switch in the OFF position when the MKDX is not in
use.
ALWAYS wear approved eye protection.
HAZARD SYMBOLS
ON / OFF
ALWAYS wear approved respiratory protection.
ALWAYS read this Owner’s Manual before operating the machine.
ALWAYS avoid inhalation of and skin contact with silica dust and/or mist.
ALWAYS use caution around gears. Keep fingers, hands, hair and clothing away from all
moving parts to prevent injury.
DO NOT touch hot engine components while the machine is running or immediately after
operating.
NEVER touch the power cord with wet hands or while standing in water when it is con-
nected to a power source.
NEVER operate the machine in an explosive atmosphere or near combustible materials.