MK Diamond MK-EZ Profile Milling Machine - Manual (Page 18)

18
MK-EZ PROFILER ASSEMBLY
(A)
Loosen the two screws on the
cutting head slide, and without
using the vertical adjustment
screw, slide the head to its
highest position and retighten
the screws to hold it there.
(D)
Tighten the screws using a 9/16"
wrench (not included).
(E)
Place frame in pan.
(B)
Place the tool on the motor
spindle and spin it on by hand.
(C)
Then using the two wrenches
provided, tighten it up. The
smaller wrench fits the flats
on the motor spindle to hold it
from turning, while the larger 1"
wrench fits the profiling tools.
PROFILE TOOL INSTALLATION