MK Diamond MK-1080 - Manual (Page 17)

17
MK-1080 PAVER SAW SET-UP
(G)
Install the diamond blade onto
arbor shaft.
(H)
The direction of rotation arrow on the
blade matching the direction of the ar-
row on the blade guard.
(I)
Verify that the blade is seated flat
against the inner flange of the
blade shaft.
(J)
Slide the outer flange back on the
arbor shaft with the recessed side
of the flange facing the blade.
(K)
Install the retaining nut on the arbor
shaft. Depress the shaft lock button
and use the blade wrench to tighten the
retaining nut in a clockwise direction.
(L)
When installing the retaining nut, do
not “cross-thread” and do not over
tighten. Lower the blade guard back
down into the cutting position.
INSTALLING THE BLADE