MK Diamond MK-5000 Gas - Manual (Page 26)

26
Two Year Maintenance
(A)
Check Fuel Line.
(Shop Maintenance Required)
Use standard grease when lubricating the MK-5000. Clean the Zerk fitting when finished lubricating.
Apply grease slowly; stop when grease is seen between joints.
Lubrication Points
(A)
Rear Blade Guard Stay-level
pivot point lubrication point, if
equipped.
(B)
Front Blade Guard Stay-level
pivot point lubrication point, if
equipped.
(C)
Front and Rear Connecting
Arms, left side (from front) lubri-
cation points, if equipped.
(D)
Front and Rear Connecting
Arms, right side lubrication
points, if equipped.
(E)
Elevation Pivot Bracket, Pivot
Shaft Housing lubrication point.
(F)
Cutting Head Rear Connect-
ing Arm lubrication point, if
equipped.
MK-5000G MaiNTeNaNCe