MK Diamond MK-5000 Gas - Manual (Page 34)

34
(G)
Remove the belt. Install the new
belt.
(H)
Verify the belt is seated in the
grooves of both pulleys.
(I)
Verify the Engine Adjustment
Strap Lock-nut is loose then
tighten the Adjustment Strap.
(J)
Check belt tension.
(proper tension 1/8" deflection of
the belt)
(K)
Tighten Engine Mounting Plate.
(L)
Install the Belt Guard.
DO NOT use a screwdriver when installing new belts. NOTe:
MK-5000G MaiNTeNaNCe
(D)
Loosen engine mounting plate
If re-tensioning, go to step J.
(E)
Loosen Engine Adjustment
Strap Lock-nut then loosen the
Engine Adjustment Strap.
(F)
Push the Engine Mounting Plate
toward the front of the unit to
loosen the belt.