MK Diamond MK-5000 Gas - Manual (Page 36)

36
Movable Cutting Table Does Not Move Correctly
(A)
Check for Roller Wheel Damage.
(B)
Verify ease and freedom of
Movement.
Blade stops Turning
(A)
Check to see if engine is
running.
(B)
Check belts. (See Belt
Inspection, Adjustment and
Replacement)
MK-5000G TrOUBLesHOOTiNG
(G)
Rod Cooling Channels and
recheck flow.
(H)
Verify Water Pump suction is
clean and pump impeller is
turning. Pump Impeller is inside
water inlet.
(I)
Verify Water Pump drive end is
in the operating position.