MK Diamond MK-20 Series - Manual (Page 28)

28
MK-20 SERIES MAINTENANCE
Check Fuel Level
1. Gasoline is highly flammable and explosive. You can be burned or seriously
injured when handling fuel.
2. To fuel, stop engine if running and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbeques, electric appliances,
power tools, etc.
5. Wipe up spills immediately.
NOTE:
WARNING
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the
fuel tank. Damage caused by spilled fuel IS NOT covered under the warranty.
2. DO NOT use stale or contaminated gasoline or an oil/gasoline mixture.
(A)
Remove the Fuel Cap. Refer to
Engine Manual for details.
For all Engine related maintenance and troubleshooting refer to the Engine Manual.
(B)
Ensure fuel level is 1” below the
throat of the Fuel Tank.
1 inch (25mm)
from throat
Maximum
Fuel Level
Engine Maintenance
(A)
Remove the Diamond Blade.
(B)
Lower the MK-20 Series to
its lowest position.
(C)
Free the Oil Drain Line.
Place a catch basin below the
Oil Drain Line. Remove the Drain
Cap to drain oil completely. Refer
to Engine Manual for details.
Engine maintenance and adjustment is necessary to keep the saw in good operation condition. Main-
tenance operations include oil changes, filter changes, air cleaner, spark plug, fuel filter etc...Perform
all maintenance procedures as recommended by the Honda, Vanguard, Kohler or Subaru engine
manual provided separately.