MTS Model 409.83 Temperature Controller - Manual (Page 15)

Model 409.83 Temperature Controller Functional
Model 409.83 Temperature Controller Introduction 15
Introduction
The MTS Model 409.83 Temperature Controller is a microprocessor-based
controller for use with MTS Model 652 and 653 High-Temperature Furnaces. It
may be mounted on a table top or on a load unit.
Model 409.83 Temperature Controller
Inappropriate use
Before you attempt to use the Model 409.83 High Temperature Controller, read
and understand this manual. Improper installation or operation of this product
can result in hazardous conditions that can cause severe personal injury or death,
and damage your equipment and specimen.
WEEE The Waste Electrical and Electronic Equipment (WEEE) symbol ( ) means
that the controller and its electronic parts must not be disposed of as unsorted
municipal waste. Proper disposal is required by approved electronic waste
collection agencies. Customers in the EC region who desire to return an end-of-
life controller and its electronic parts are encouraged to contact your local MTS
Systems Sales/Service Offices for instructions.
Model 409.83 Temperature Controller Functional Description
Closed-loop control is maintained in each zone by a single Eurotherm Model
2216 Temperature Controller (control module). The Model 409.83 Temperature
Controller includes up to three Eurotherm control modules which correspond to
up to three heat zones in the furnace. Each module accepts a thermocouple input
and outputs proportional power to control the respective furnace heating element.
The control modules are programmed at MTS for use with Series 652 or 653
High-Temperature Furnaces. Tuning parameters establish the temperature
setpoint, control accuracy, and operating limits. Alarm circuits function as an
Eurotherm Model 2216
Temperature Control
Modules