MTS Model 409.83 Temperature Controller - Manual (Page 34)

Model 409.83 Temperature Controller 34
Selecting an Access Level
Operation
3. Once the parameter has been selected, use the up and down arrows to set the
parameter availability in Operator level.
There are four codes available:
• ALTR Makes a parameter alterable in Operator level
• PRO Promotes a parameter to the Home list display
• READ Makes a parameter or list header read-only
• HIDE Hides a parameter or list header
Returning to
operator level
To return to operator level from either FULL or EDIT level, repeat entry of
password and select OPER on the GOTO display. In Edit level, the control
module will automatically return to operator level if no button is pressed for 45
seconds.