MTS Model 409.83 Temperature Controller - Manual (Page 33)

Selecting an Access Level
Model 409.83 Temperature Controller Operation 33
• Allows viewing and editing of parameters defined in the Edit level.
• Full Level
• Allows viewing and editing of all parameters.
• Edit Level
• Allows you to set which parameters are accessible in the Operator
level.
• Configuration Level
• Allows you to set up the fundamental characteristics of the controller.
Full, Edit, and Configuration levels are password-protected to prevent
unauthorized access.
Selecting an Access Level
To select an access level:
1. From the Home display, press the page button until you see the ACCS list
header.
2. Press the scroll button.
The display will read CODE. Enter the password using the up and down
keys (the password is set to 1 when the unit is shipped from the factory).
Once the correct password is entered, the lower display will read PASS,
indicating that the access level is unlocked.
Note Refer to the Eurotherm Model 2216 Temperature Controller manual for
information on changing passwords.
3. Press the scroll button to proceed to the GOTO display.
4. From the GOTO display, press the up or down arrows to select the desired
access level.
There are four access levels available:
• OPER Operator level
• FULL Full level
• EDIT Edit level
• CONF Configuration level
Editing the
operator access
In the edit access level, you can set which parameters are accessible in the
Operator access level and/or accessible from the Home display. To set operator
access to a parameter:
1. Select the Edit level.
2. Select the parameter to be set by toggling through the list headers (page
button) and selecting the parameter (scroll button).