MTS Model 409.83 Temperature Controller - Manual (Page 25)

Model 409.83 Temperature Controller Calibration
Model 409.83 Temperature Controller Installation 25
Model 409.83 Temperature Controller Calibration
The basic calibration of the controller is highly stable and set for life. User
calibration allows you to offset the permanent factory calibration to either:
• Calibrate the controller to your reference standards.
• Match the calibration of the controller to that of a particular transducer or
sensor input.
• Calibrate the controller to suit the characteristics of a particular installation
• Remove long term drift in the factory-set calibration.
User calibration works by introducing zero and span offsets onto the factory-set
calibration.
Note For complete information on enabling and performing user calibration,
refer to the Eurotherm Model 2216 Temperature Controller manual.