MTS Series 311 Load Frame User Manual
Page 82
Load Unit Addendum
82
Addendum
Handset functions
The handset is intended to be used in a system for specimen loading or setup. In
some applications, it can be used to completely run a test.
1
2
3
4
5
6
7
15
14
12
11
10
9
8
L I N E 1 U P T O 2 0 C H A R
L I N E 2 U P T O 2 0 C H A R
L I N E 3 U P T O 2 0 C H A R
L I N E 4 U P T O 2 0 C H A R
13
Handset Controls and Indicators
#
Control/Indicator
Description
1
Page
Displays previous or next text in the display.
2
Active
Indicator. When lit, indicates the system is active (power
applied).
3
Scroll highlight
Scrolls the highlighted selection down. Selection cycles to the
top when the bottom line is highlighted and the switch is
pressed.
4
Thumb-wheel
Makes fine actuator adjustment (towards display – up; away
from display – down). Only if Handset Enable is active.
5
Pause
Pauses the test action. This must be pressed again for the test to
resume. Only if the application test software is active.
6
Stop
Stops the test action. Only if the application test software is
active.