MTS Multipurpose Elite - Manual (Page 44)

2. Drag and drop the Ramp activity on the “Drop Activities Here” text in the work area.
Adding a Ramp Activity
3. Define Ramp activity properties:
a. Enter the following values as necessary:
Ramp Activity Properties
Value Property
Ramp to Mean Display Name
Time Timing Type
2 sec Time
Ramp Ramp Shape
No Compensator Compensator
Axial Channel List
Displacement Control Mode
4 mm Absolute End Level
5.2.5.0 Adding a Cycle Activity
Use this task to add a Cycle activity to the procedure and define its properties. During the test, the Cycle
activity applies a sinusoidal command relative to the mean level.
44 Multipurpose Elite Test Design Guide
5.0 Creating Tests