MTS Multipurpose Elite - Manual (Page 65)

Note:
The controller and configuration file you selected in the previous two steps are used for creating
and running tests using the simulation and this test design guide. When you use other stations
connected to actual systems, you may need to select other controllers or configuration files tailored
to the station that you are working with.
3. On the toolbar, select an access level of Configuration.
4. Enter the password for the Configuration access level. By default, the password is “Configuration”.
5. On the Tools menu, select the Event-Action Editor.
6. On the Define Actions tab, click Digital Output.
7. Click the Add button.
8. Enter the following as necessary:
Turn On Light Properties
Value Property
Turn on light Name
Set Digital Output 1
Disabled Digital Output 2
Disabled Digital Output 3
9. Click the Apply button.
10. Click the Add button.
11. Enter the following as necessary:
Turn Off Light Properties
Value Property
Turn off light Name
Clear Digital Output 1
Disabled Digital Output 2
Disabled Digital Output 3
12. Click the Apply button, and then close the Event-Action Editor.
13. Return the access level to Operator.
14. On the File menu, select Save Parameters.
15. Minimize the main window of the Station Manager application.
Multipurpose Elite Test Design Guide 65
6.0 Creating Advanced Tests