0 adding a second ramp activity – MTS Multipurpose Elite User Manual
Page 46
Advertising
Value
Property
2 mm
Relative End Level 1
-2 mm
Relative End Level 2
N/A
Phase Lag
5.2.6.0 Adding a Second Ramp Activity
Use this task to add a second Ramp activity to the procedure. During the test, the second Ramp activity
ramps command to zero.
1. On the Procedure workspace, right-click the existing Ramp activity and select Copy. Then, right-click
below the Cycle activity and select Paste.
Copying and Pasting Existing Ramp Activity
2. Define Ramp activity properties:
a. Ensure that the Ramp activity is selected.
b. Enter the following as necessary:
Second Ramp Activity Properties
Value
Property
Return to Zero
Display Name
46 Multipurpose Elite Test Design Guide
5.0 Creating Tests
Advertising