MTS Multipurpose Elite - Manual (Page 146)

Delta Level Triggering Example
When a value outside of the delta value is detected, the trigger establishes a new reference level and
monitors the reference signal for another delta value change from that reference level.
This type of trigger is useful when the reference signal sometimes changes quickly, and at other times
changes very little. It stores more data when the signal is changing and less when it is not changing.
For More Information
Task
Reference
Timed DAQ Trigger Properties (p. 144)
Peak Valley DAQ Trigger Properties (p. 147)
Peak-Valley DAQ Triggering Overview
Peak-Valley triggering places the selected signal values in the buffer when the application detects a peak
or valley in the user-selected reference signal. Peaks and valleys are determined by the reference signal
reversing direction by more than the specified sensitivity.
146 | MTS TestSuite
Data Acquisition (DAQ)