MTS Multipurpose Elite - Manual (Page 611)

Description Control
Override
Caution :
Station limits are disabled during the
override time.
Disabling station limits also disables
safety limits.
Always clear the actuator area before
applying hydraulics.
Temporarily override a test station interlock so that
you can clear the cause. Each time you click the
button, ten seconds is added to the length of time
the interlock is overridden, up to a total of 120
seconds. The digital readout to the right of the button
shows the duration and the countdown.
Power controls
Power Controls
Description Control
Place the HSM (hydraulic service manifold) for the
test station and the HPU (hydraulic power unit) in
their zero-pressure states (red indicators lit). Off
Place the HPU in the high-pressure state (green
indicator lit) and the HSM for the test station in the
low-pressure state (amber indicator lit). Low
Place the HSM for the test station in the
high-pressure state (green indicator lit). You must
first click Low before you can click the High button. High
MTS TestSuite | 611
Running Tests