MTS Multipurpose Elite - Manual (Page 352)

Description Item
Specify the end level for the control mode. Click the
toggle button to specify a numeric value or a variable.
Specify the end level for each channel. Absolute End
Level
Sweep
Sweep Activity Overview
Sweep Activity Icon
Note:
The Sweep activity is only available for use with the MTS FlexTest controller.
With the Sweep activity, you can sweep a command waveform between two frequency values in a linear
or logarithmic progression at a constant amplitude.
Sweep Activity
When a sweep command starts, it always moves first to End Level 1, and then to End Level 2.
Sine, ramp, and square start levels
Sine, ramp, and square commands use the first segment to bridge any difference between the current
level and the End Level 1 that you specify. This transition segment is counted as the first segment.
352 | MTS TestSuite
Test Activities