MTS Multipurpose Elite - Manual (Page 510)

Y Variable and X Variable
Y Variable
Select a single value variable for which you want data plotted on the Y axis of the chart.
X Variable
Select a single value variable for which you want data plotted on the X axis of the chart.
Cycles to Display Property
The Cycles to Display property works in conjunction with the Cycle Decimation Filter Selection property.
Cycle Decimation Filter Selection determines when variable data should be displayed for the test cycles.
Cycles to Display specifies how many should be displayed at one time. For example, if the Cycle
Decimation Filter Selection is set to display data for every fifth cycle, and the Cycles to Display is set
to display 3, the display starts out displaying cycle numbers 5, 10, 15 and then 10, 15, 20 and then 15, 20,
25 and so forth.
There are several test-run display tools that share similar chart properties:
• Cycle Time Chart
• History Chart
• Hysteresis Chart
• Array-Variable Chart
510 | MTS TestSuite
Test-Run Displays