MTS Criterion Series 60 - Manual (Page 134)

Routine Maintenance Overview Checklist
Recommended Service
Annually Weekly Daily Calendar Time Using 8 Hour Running Time Rate Per Day
200 40 8 RUNNING TIME-HOURS
X Shunt cal check
X Clean work area/machine surface/jaw
X Verify limits and Emergency Stop
X Inspect cable/connections
PC Maintenance
MTS Back up testing software files (*.reg/.cal files)
MTS Defragment hard drive
System Inspection
MTS Inspect/clean controller
MTS Inspect cable connections
System Checks
MTS Check Emergency Stop
MTS Check piston travel limit
MTS Check crosshead upper limit
MTS Check crosshead lower limit
MTS Check load cal/shunt cal
MTS Check lead screw nuts
Lubrication
134 | MTS Criterion ™ Series 60
Maintenance