If required, resolve resource errors – MTS Criterion Series 60 User Manual
Page 96
Advertising
![background image](/manuals/568070/96/background.png)
Right-click the Actuator meter and select Zero Signal. The meter will read near 0.00 mm. You will be
able to return to this 0.00 mm position easily at the conclusion of the test by clicking the Return To
Position button in the Actuator Controls panel.
If Required, Resolve Resource Errors
Resource errors occur if the resources in the software do not match the resources for the station. TWX
indicates resource errors with a white “x” encircled in red.
1. Search for resource errors in TWX.
Check the main tabs for white “x”s encircled with red.
2. If you find a resource error, drill down in the tabs until you find the root cause of the resource error.
96 | MTS Criterion
™
Series 60
Running the Example Tension Test
Advertising