Running the test – MTS Criterion Series 60 User Manual
Page 98
Advertising
![background image](/manuals/568070/98/background.png)
Running the Test
1. Set the Area variable for round geometry.
Select Define > Variables, and then select the Area variable. In the Properties panel, enter Round
for the Option parameter and click Apply.
2. Run the test.
a) Click the green arrow (Run the Test) button.
Note: If the controls are locked, you need to disable the handset by pressing the Handset
Enable button on the handset.
b) Enter parameters when prompted.
98 | MTS Criterion
™
Series 60
Running the Example Tension Test
Advertising