Change the hsm filter – MTS Landmark Tabletop User Manual
Page 100
![background image](/manuals/568073/100/background.png)
Weekly
Clean exposed areas of the actuator piston rod with a clean, dry, lint-free rag. If the actuator is continually
exposed to a dirty operating environment, clean the piston rod on a daily basis.
Monthly
Inspect the actuator piston rod and seals for excessive wear or leakage. Small scratches in the axial direction
of the piston rod or polishing of the rod surface is considered normal operating wear.
Yearly
Change actuator seals if necessary. Actuator assemblies can require more or less frequent seal changes
depending on usage. External oil leakage and/or decreased performance are indicators of seal wear. Seal
replacement is considered a service procedure; contact your MTS Service Engineer for additional information.
Change the HSM Filter
The hydraulic service manifold filter needs to be changed periodically.
Component Identification
Description
Item
Dirty Filter Indicator
1
Inlet Filter
2
100 MTS Landmark™ Tabletop Load Units Product Information
Maintenance