MTS Landmark Tabletop - Manual (Page 43)

Lift Point Locations
Description Item
M20 X 2.50 mm Holes for Swivel Hoist Rings (supplied for lifting) 1
Slings 2
Warning:
Airmounts can be overinflated and then explode.
You can be seriously hurt if an airmount explodes, sending fragments flying.
Only inflate airmounts that have the full weight of the load unit resting on them. Never inflate
an airmount above 0.41 MPa (60 psi). Check airmount pressures with an accurate pressure
gage.
Each airmount's inflated height—measured from the floor to the bottom of the load unit’s
leg—should be 57–63 mm (2.25–2.5 in).
MTS Landmark™ Tabletop Load Units Product Information 43
Installation