MTS Landmark Tabletop - Manual (Page 74)

Routine Maintenance Overview Checklist
Recommended service to be performed at each running time interval noted
Annually Biweekly Weekly Daily Calendar Time using 8 hour Running
Time Rate Per Day
2,000 1,500 1000 500 80 40 8 Running Time-Hours
X
2
Ensure the actuator platen area is clean.
X Check all filter indicators.
X Ensure all hose, cables, and connectors are
attached properly.
X Ensure that the crosshead, lifts, and
supports are in working order.
X Ensure that the actuator is dry.
X Ensure that the hydraulic service manifold
is in working order.
X Ensure that the lift seal connection is dry.
X Ensure that the lock seal condition is dry.
X Lubricate the axial/torsional spline. (Bionix
frame at 75-100 hrs)
X Ensure that the actuator is in working order.
X Inspect all labels to ensure they are
attached and legible.
Crosshead/Load Frame
MTS MTS MTS MTS MTS
3
Ensure that the crosshead, lifts, and
supports are in working order.
MTS MTS MTS MTS MTS Ensure that the lift seal condition is dry.
MTS MTS MTS MTS MTS Ensure that the lock seal condition is dry.
2
Symbol denotes services performed by equipment operators. Most of these procedures involve visual checks
that should not interfere with test system operation. These checks are also completed by trained field service
engineers on each Routine Maintenance visit.
3
Symbol denotes service performed by trained field service engineers as part of an MTS Routine Maintenance
plan. Some of these procedures require special service tools and/or specific service training to complete.
74 MTS Landmark™ Tabletop Load Units Product Information
Maintenance