Series 111 accumulator: maintenance overview – MTS Landmark Tabletop User Manual
Page 93
•
For an axial-torsional system, torque the screws to 24 N·m (17 lb·ft).
6. Check the alignment again.
Take another reading to make sure the TIR remains within specifications.
•
If the TIR remains within specifications, continue to the next step.
•
If the TIR is out of specification, return to Step 3 in this procedure.
7. Lower the load unit.
Remove the blocks of wood elevating the load unit and reattach the load unit to its mounting surface.
Series 111 Accumulator: Maintenance Overview
Maintaining the proper pressure level for your accumulators is essential for optimum system performance
and component life. Review the following figure to familiarize yourself with the accumulator components and
their locations. Also review the following guidelines before performing any procedure.
Accumulator Components
Description
Item
Piston
1
MTS Landmark™ Tabletop Load Units Product Information 93
Maintenance