MTS Landmark Tabletop - Manual (Page 36)

Dimensions Item
5.1 mm (0.20 in) G
Depth H
Near Side: 25.4 mm (1.00 in)
Far Side: 20.3 mm (0.80 in)
63.5 mm (2.50 in) I
Series 662 Force Transducers
The force transducer commonly used with the axial-torsional tabletop Series 370 Load Unit is a Series 662
Force Transducer. There is no manual for the force transducer. The following table provides the specifications
for the force transducers.
Specification Parameter
Axial-Torsional Capacity
15 kN (150 N·m) Model 662.20HD-04
25 kN (250 N·m) Model 662.20H-05
15 V DC Maximum excitation input
350Ω Axial, 700Ω Torsional Bridge resistance
0.15% of full scale Hysteresis
0.3% of full-scale axial, 0.15% of full-scale torsional Nonlinearity
0.0036% of reading/°C (0.0020%/°F) Temperature
-46°C to 93°C (-50°F to 200°F) Usable range
21°C to 77°C (70°F to 170°F) Compensated range
1.5 mV/V at full-scale load (662.20-04) Output
2 mV/V at full-scale load (662.20-05)
Thread Size Axial-Torsional Load
Capacity Axial Load Capacity Model
M8 x 1.25 mm 150 N·m 15 kN 662.20H-04
M10 x 1.50 mm 250 N· m 25 kN 662.20H-05
36 MTS Landmark™ Tabletop Load Units Product Information
Introduction