NTi Audio Digilyzer DL1 - Manual (Page 21)

21
Fig 4-08, Multiple user startup screen
setup screen
The setup screen allows to customize basic settings of the
Digilyzer.
AuTo poWer oFF defines the time of the automatically switch off
after the last key-press.
AuTo LIGHT oFF defines how long the backlight stays on after
being activated.
ppM over THresH defines the number of full scale values, causing
a clipping indication at the ppm meter.
MuLTIpLe seTup allows four users to store their individual settings.
To enable the multiple setup mode, set the corresponding entry to
ENABLE. The next time the Digilyzer is switched on, the user will
have to select the individual setup-ID (1, 2, 3 or 4) in the startup
screen. All parameter settings in all measurement modes are now
stored under this ID at the switch off and are recalled if this ID is
selected at the next start up.
Fig 4-07, Setup screen
Basic Operation