NTi Audio Digilyzer DL1 - Manual (Page 57)

57
description
The signalized word length in the
channel status has changed.
The status of channel A is not equal to
the channel status of channel B.
Other bits than those mentioned in
this table changed in the channel
status.
Consistency check based events
The sampling frequency indicated in
the channel status is not equal to the
measured sampling frequency.
The world length indicated in the
channel status is not equal to the
measured word length.
The measured accuracy of the
sampling frequency is worse than
the accuracy indicated in the channel
status (consumer mode only).
In the professional format the 1C2f
mode should be signalized when
used. This event occurs if the pro
channel status signalizes a 1C2f
mode but the Digilyzer is not set to
1C2f mode or vice versa.
DL1 event
Cs WordLeN
Cs CHA<>CHB
Cs oTHer
IC
FreQueNCY
IC WordLeN
IC FreQppM
IC Mode1C2f
Appendix
remark
n.a.
ADAT, 10
rec./s
n.a.
ADAT,
10 rec./s
n.a.
ADAT,
10 rec./s
n.a.
ADAT,
1 rec./s
n.a.
ADAT,
1 rec./s
n.a.
ADAT,
1 rec./s
n.a.
ADAT,
1 rec./s