NTi Audio Digilyzer DL1 - Manual (Page 36)

36
• Select the REC field, press enter and the RECORD window is
displayed.
• Select the recording interval of the recording. The max.
recording length is defined by this resolution. The Digilyzer has
the capability to store data of 500 recording intervals. A higher
recording interval is causing a shorter maximum recording
length.
• Select and confirm GO! to start the logger function. The
recording setup window disappears and the REC field is
flashing.
• The logging may be stopped by pressing the enter key at the
REC field.
Display interval: The events occurred during the user defined
display interval are summarized and shown on the Digilyzer. The
bundling of logger data helps to make the events more clear and
easy to overview.
After the logging is completed the display interval may be
changed.
• Zoom out the intervals, e.g. the error log has a recording interval
of ten seconds and you want to know how many events have
been found in the last hour, just zoom out to a display interval
of one hour.
• Zoom in to get a more detailed information about the time of
individual events occurred.
• Set to ALL (maximum zoom out) to get an overview of all
records.
Measurement Functions
Sum of all
events in
event list
Fig 5-21, Overview records
Display interval
Mask frame
Event list
Sum of event
occurances
Event name